Your Pool Filter: The Hardest-Working Employee Nobody Thinks About!

Here's something every Brevard County pool owner should know: You can have perfectly balanced chemicals and STILL have a cloudy swimming pool!

How is that possible?

Simple. Your pool filter might not be doing its job!

Think about it. Your filter works day after day, trapping dirt, pollen, leaves, dead algae, and all the other unwanted visitors that find their way into your swimming pool.

And here in Brevard County, Mother Nature certainly knows how to keep our filters busy!

With October bringing changing weather patterns, gusty winds, and occasional storms, your filtration system can face some serious challenges.

What Does Your Pool Filter Actually Do?

Your pool filter has one primary responsibility: remove unwanted particles from the water as it circulates through the system.

While chlorine helps sanitize your pool, the filter physically removes suspended debris.

They work together.

Without adequate filtration, your swimming pool can become cloudy, circulation can suffer, and maintaining proper water quality becomes more difficult.

It's like washing your dishes with dirty water.

Eventually, something's going to look pretty nasty!

Five Warning Signs Your Filter Needs Attention

Your pool water looks cloudy.
If your chemicals are properly balanced but the water remains cloudy, poor filtration could be contributing to the problem.
Your filter pressure is unusually high.
As filters collect dirt and debris, resistance to water flow increases. A common guideline is to clean the filter when pressure rises approximately 8–10 PSI above its normal clean operating pressure, although manufacturer recommendations vary.
Water circulation seems weaker than normal.
If your return jets aren't pushing water as strongly as they usually do, something may be restricting circulation.
This could involve the filter, skimmer baskets, pump basket, or another equipment issue.
Your filter cartridges are deteriorating.
Over time, cartridge pleats can become damaged, flattened, or difficult to clean.
Eventually, replacement becomes necessary.
Your pool keeps getting dirty unusually quickly.
If debris remains suspended or water clarity doesn't improve after proper cleaning and chemical treatment, your filtration system deserves a closer look.

Here's Something Many Homeowners Don't Realize

A dirty filter doesn't necessarily mean you need a new filter.

Sometimes a thorough cleaning is all that's required.

However, cleaning a damaged or worn-out cartridge won't restore its original performance.

That's why regular inspection matters.

At Premier Coastal Pool Services, we routinely clean filters approximately every three to four weeks as part of our maintenance program, adjusting when conditions require additional attention.

We also inspect pool equipment during weekly service.

This Week's Pool Tip

Take a look at your pool's filter pressure gauge!

When your filter has just been cleaned, record its normal pressure reading with the pump operating at its usual speed.

Check it periodically.

If the pressure rises significantly above that baseline, it's time to investigate.

Also, after windy weather, check your skimmer and pump baskets for accumulated debris.

Important: Always shut off the pump before servicing equipment, and never open a pressurized

filter tank. Follow the manufacturer's pressure-release instructions or have a qualified professional handle the work.

Why Professional Weekly Maintenance Matters

At Premier Coastal Pool Services, we don't believe maintaining a swimming pool means simply throwing chemicals into the water and hoping for the best.

Our regular service includes: